Embedded ARTiGO-A1150 User Manual page 13

Table of Contents

Advertisement

USB 2.0
USB 2.0 ports
• Supports four USB 2.0 ports
• Supports one USB device port
Storage
Hard Disk Drive
• One 2.5-inch hard disk drive bay supports 2.5-inch SATA
Interface
SD
System Indicator
Power Status LED
• One green color LED
HDD Activity LED
• One red color LED
Watchdog Timer
Output
• System reset
Interval
• Programmable 1~255 sec.
Front I/O
I/O connectors
• Two USB 2.0 host ports
• One USB device port
• Three 3.5Ø Audio jacks support
Rear I/O
• One VGA connector (D-Sub 15-pin female connector)
• Two USB 2.0 host ports
• One HDMI
• One RJ-45 connector for Gigabit Ethernet connection
Left I/O
Power Consumption
Power Supply
• Typical
Input Voltage
• DC 12V Power Input
• Typical Power Input: 12VDC @
Power Input Connector
• DC Power Input connector by DC Jack connector
Fuse Rating
• 7A @ 125V
interface HDD and Flash SSD
• Reserve space for optional support of one SD card by
EMIO-5130 (optional) SD card reader
• Line-in, Line-out and Mic.-in
®
connector
• One SD slot for SD card (optional)
12.84W, Maximum 20.72W
1.07A
5

Advertisement

Table of Contents
loading

Related Products for Embedded ARTiGO-A1150

Table of Contents