Table of Contents
Advertisement
ELECTRICAL SYSTEM
Headlamp Alignment
The sealed beam is aligned in the vertical Plane by turoing the
screw at the top of the lamp and in the horizontal Plane by
turning $e screw on the side. Alignment of the high beam
on one lamp is best carried out with the other lamp covered
Maximum illumination is obtained, and discornfort to other
road users is Drevented, bv ensuring that the lamp beams do
not Droiect above lhe horizbntal when the vehicle iifuuy laden.
Adjristrients, when necessary, should be entrusted to a Dealer
having beam setting equiPment.
Light Unit Replaceme
The headlamps are fitted with sealed beam units. Fi
failure necessitates light unit renewal.
Remove the s
rim by inserting the tool, provided in the kit, behind t
and levering sideways (Fig. 57)
Remove the scre
Fig. 58, and withdraw the rim to release the light unit. l
distub the beam aiming adjustment screws (2).
Disc
the plug, Fig. 59.
44
Fig. 5?
Fig. 5E
Fig. 59
Fig. 60
Hide quick links:
Advertisement
Table of Contents
