Restoring Default Settings - Teac NT-503 Owner's Manual

Troubleshooting (continued)
Bluetooth function
Cannot show device name.
e This unit does not support the display of symbols or double-
byte characters, including Japanese and Chinese.
Use only English letters and numbers for the names of Bluetooth
devices connected to this unit.
Cannot change connected Bluetooth device.
e This unit cannot have Bluetooth connections to multiple
Bluetooth devices at the same time.
To change the device connected with this unit by Bluetooth,
end the connection with the currently connected Bluetooth
device before connecting to another Bluetooth device.
Since this unit uses a microcontroller, external noise and other inter-
ference can cause the unit to malfunction. If this occurs, unplug the
power cord, wait for a while, and then turn the unit on again and
restart operations.
26

Restoring default settings

ATTENTION
This initializes all settings, including network settings.
1
While pressing and holding the MENU button, set
the POWER switch to ON.
2
Release the MENU button when the "SETUP CLEAR"
message appears.
The factory default settings are the setting values shown in the
screen images used in the explanations in this manual.
ATTENTION
After "SETUP CLEAR" appears for a few seconds, the following startup
screens appear.
Do not put the unit into standby until the startup screens
have been shown.
WELCOME
TEAC
NT-503
c