<Mode Change During Stopwatch Measurement
Even when button © is pressed duringstopwatch measurement to switchthe
mode, the measurement continues. Byreturning to the Chronograph mode again,
the continued measurement can be displayed.
10. Low Battery Warning Function
When the service life of the battery approaches its end, the colon (:) on the
digital display starts flashing. When Analog 2 is set to indicate "Seconds", the
Analog 2 dial movement changes to 2-second interval movement (moves by 2
increments every 2 seconds) in the case of low battery.
In these cases, replace the battery as soon as possible.
23