Parts And Controls - Sony KDL-48W650D Operating Instructions Manual

Parts and Controls

TV
2
  (Power) / + / –
Short press  to turn the TV on.
Long press  until the TV turn off.
When the TV is on,
Volume
Press + or – button to increase/decrease the
volume.
You can also press  until
displayed. Increases/decreases the volume
by pressing the + or – button.
Input
Press  until
notification is displayed.
Moves the selected input source by pressing
+ (up) or – (down) button.
Programme
Press  until PROG notification is displayed.
Select the programme by pressing + (next)
or – (previous) button.
 (Sensors/LED indicator)
Note
• Make sure that the TV is completely turned off before
unplugging the AC power cord (mains lead).
• To disconnect the TV from the AC power completely,
pull the plug from the mains socket.
• Please wait for a while when perform input selection
to change to other input.
1
notification is
• Receives signals from the remote control.
Do not put anything over the sensor.
Doing so may affect its function.
• Lights up in amber when the [Sleep Timer]
or [On Timer] is set (page 25), or the TV is
in Photo Frame Mode (page 15).
• Lights up in green when [Power Saving] is
set to [Picture Off] (page 27).
• Lights up in green when the TV is turned
on.
• Does not light up when the TV is in
standby mode.
• Flashes while the remote control is being
operated.
GB
7
GB