Table of Contents
Advertisement
Quick Links
WWW.SMITTYBILT.COM
Note: It is essential that the operator of this product read and understand the contents of this
manual before installing and using this product.
Parts Included
Compressor
Storage Bag
P/N: 2781
SPECIFICATIONS
Maximum Voltage: 13.8 volt
Maximum Amperage Draw: 45 amp
Maximum Restart Pressure: 150Psi
Maximum Air Flow: 160 L/min
P/N: 2780
SPECIFICATIONS
Maximum Voltage: 13.8 volt
Maximum Amperage Draw: 30 amp
Maximum Restart Pressure: 150Psi
Maximum Air Flow: 72 L/min
For Technical Support/Warranty Information please call 310-762-9944
Qty
1
1
SAVE THIS MANUAL FOR FUTURE REFERENCE
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Air Compressor
Part # 2780, 2781
Parts Included
Coil Air Hose
Accessory Kit (Needles)
Qty
1
1
Advertisement
Table of Contents
Related Manuals for Smittybilt 2780
Summary of Contents for Smittybilt 2780
-
Page 1: Air Compressor
Maximum Air Flow: 160 L/min P/N: 2780 SPECIFICATIONS Maximum Voltage: 13.8 volt Maximum Amperage Draw: 30 amp Maximum Restart Pressure: 150Psi Maximum Air Flow: 72 L/min For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220... - Page 2 DO NOT MODIFY: Never drill, modify or attempt to repair the compressor. There are no user serviceable parts inside. SAFE HANDELING: Never carry the compressor by the hose or power cord. PAY ATTETION: Do not leave the compressor running unattended. For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220...
- Page 3 Do valve stem. Watch the gauge closely, switch the unit off or remove the inflator from the tire when the manufacturer’s recommended pressure has been achieved. For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220...
- Page 4 We recommend that you use a second tire pressure gauge to verify your tires are inflated to the proper pressure. Stopping and restarting: at high pressure can overload and blow the in-line fuse (Part #2780). At higher inflation pressures, start the compressor and then attach to the filler to the tire valve stem. If you stop the unit and need to resume inflation, remove the inflator tip from the tire valve, start the unit and reattach with the unit running.
- Page 5 Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer’s intended use or...
Need help?
Do you have a question about the 2780 and is the answer not in the manual?
Questions and answers