Advertisement
PRODUCT FEATURES:
Strong Massage Action
Soothing Heat
Power Button
Activates Massage
Heat Button
Activates Heat
INSTRUCTIONS FOR USE:
Fig.1
Adaptor Instructions
1. Insert adaptor jack into the plug underneath left handle strap. (Fig. 1)
2. Plug into a AC 220v outlet.
3. T his unit incorporates a wire frame allowing you to contour the unit to your
neck. Place massager on your neck and mold the wire framing to desired
position. (Fig. 2)
4. T o activate the massage action, press the power button on the control pad.
(Fig. 3)
5. P ress once for low speed, a second time for high, and press again to turn the
unit off.
6. T o activate the heat function, with massage running, press the heat button
on the control pad. (Fig. 3).
7. To turn off the heat function, simply press the heat button again.
NOTE: Heat is a mild, comfortable heat.
Optional Battery Instructions
Please note: Batteries will only operate the massage function. You must use the
adaptor to activate the heat function.
1. Locate the zipper on the back of the unit.
2. Unzip to expose the battery compartment, remove lid. (Fig. 4)
3. I nsert 4 "AA" batteries (not included). Proper battery orientation is noted
inside the battery compartment housing.
4. R eplace the cover and zip the back portion back up, making sure both zipper
ends are touching each other to ensure zipper is closed properly.
5. To activate massage, follow steps 4 – 5 from adaptor instructions.
Fig.2
Fig.3
Battery Precautions
• Use only the size and type of batteries specified.
• W hen installing batteries, observe proper +/- polarities. Incorrect installation
of batteries may cause damage to the unit.
• Do not mix old and new batteries.
• D o not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh,
etc.) batteries.
• Do not dispose of batteries in fire. Batteries may explode or leak.
• I f the unit is not going to be used for a long period of time, remove batteries
to prevent damage due to possible battery leakage.
• C lean the battery contacts and also those of the device prior to battery
installation.
• Remove depleted batteries promptly.
• D ispose of properly in accordance with all state, province and country
regulations.
• Remove the batteries before attaching the adaptor.
NOTE: There is a 15 minute auto shut-off on this appliance for your safety. This
feature should not be considered as a substitute for 'OFF'. Always remember to
switch the appliance off when not in use.
3
Customised Wire Frame
Contours to fit your neck
Fig.4
Advertisement
