Alpine CDA-9887 Owner's Manual page 43

CD
Antenna Receptacle
®
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
®
Remote Turn-On Lead (BluelWhite)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
@ Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio interface output of a cellular
phone which provides ground shorting when a call is
received.
®
Illumination Lead (Orange)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will allow the backlighting of
the CDA-9887to dim whenever the vehicle's lights are
turned on.
®
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+ )12V
only when the ignition is turned on or in the accessory
position.
(j)
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
@
Fuse Holder (10A)
®
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
@)
Power Supply Connector
@ Right Front (+) Speaker Output Lead (Gray)
@ Right Front (-) Speaker Output Lead (Gray/Black)
@
Right Rear (-) Speaker Output Lead (Violet/Black)
@ Right Rear (+) Speaker Output Lead (Violet)
@
Left Rear (+) Speaker Output Lead (Green)
@ Left Rear (-) Speaker Output Lead (Green/Black)
@ Left Front (-) Speaker Output Lead (White/Black)
@ Left Front (+) Speaker Output Lead (White)
@)
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, HD Radio™ TUNER
MODULE, etc.) equipped with Ai-NET.
• Interface adapter for iPoJi9 (KCA-420i) is not recommendedfor use
with this product.
• You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) to this component.
®
Steering Remote Control Interface Connector
To steering Remote control interface box.
@
Rear Output RCA Connectors
RED is right and WHITE is left.
@ Front Output RCA Connectors
RED is right and WHITE is left.
@
Subwoofer RCA Connectors
RED is right and WHITE is left.
@ Ai-NET Cable (Included with CD Changer)
@ RCA Extension Cable (sold separately)
@ iPod Direct Connector
Control iPod signals.
Connect this to an iPod or to an optional Bluetooth Box. To
use a hands-free mobile phone, an optional Bluetooth Box
connection is required. For details on connection, refer to
the Owner's Manual of the Bluetooth Box.
®
FULL SPEEDTM Connection Cable (KCE-422i)
(sold separately)
@ Setting the 2.2ch (3WAY) /4.2ch (F/R Sub-W) Switch
Set the 2.2ch (3WAY)
14.2ch
(FIR Sub-W) switch according
to your audio system.
@) System Switch
When connecting a processor or divider using Ai-NET,
place this switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
• Be sure to tum the power off to the unit before changing the switch
position.
41-EN