Sharp LC-46D64U Service Manual page 25

LC-42D64U/46D64U/52D64U
8. Remove the 2 lock screws, 2 lock Shaft, 2 lock Shaft and detach the Terminal Side Angle.
9. Remove the 3 lock screws and detach the AC INLET Unit.
10.Remove the 6 lock screws and detach the POWER Unit.
11.Remove the 5 lock screws and detach the TERMINAL Unit.
12.Remove the 3 lock screws and detach the MAIN PWB Radiator.
13.Remove the 2 lock screws and detach the MAIN Unit.
10
POWER Unit
9
AC INLET Unit
Terminal Side Angle
8
8
8
TERMINAL Unit
11
12
MAIN Unit
13
MAIN PWB Radiator
2 – 11