Handling Precautions - Kyocera Marvera Basic Manual

Handling precautions

These precautions are provided to ensure that performance
can be fully demonstrated. Thoroughly read these
precautions to ensure correct use.
■
Precautions common to the main unit,
battery pack, back cover, charging
equipment, micro au IC-Card 02,
peripheral devices
●
Do not apply excessive force to the product during use. Be sure not to put
the product into a tightly packed bag or place a heavy object on the product
in a bag. Sitting on the product in your pocket might damage the display or
internal circuit board resulting in a malfunction.
Keeping an external device connected to the external connection jack might
damage the connector resulting in a malfunction. Such damage and
malfunction are not covered by the warranty, even if there is no external
damage.
●
To ensure the water resistance (equivalent to IPX5 and IPX8) of this product,
use the product with the specified back cover, and also use with the external
connection jack cover tightly closed.
Note that the water resistance is not guaranteed for all usage conditions. Do
not allow water to get inside the product or splash water on the battery pack,
charging equipment or optional accessories. Do not attach/remove the back
cover or open/close the external connection jack cover in the rain or with any
water on the surface of the product. Doing so might cause water intrusion
resulting in internal corrosion.
Malfunctions determined to be caused by water intrusion are not covered by
the warranty.
●
Do not use the product in extremely hot, cold or humid places. (Use within an
ambient temperature range of 5°C to 35°C and humidity range of 35% to
85%.)
- Charging equipment
- Peripheral devices
12
●
Do not use the product in extremely hot, cold or humid places. (Use within an
ambient temperature range of 5°C to 35°C and humidity range of 35% to
90%. Temporary use at 36°C to 40°C is allowed.)
- Product main unit
- Battery pack, micro au IC-Card 02 (installed in product main unit)
●
Do not use in places subject to lots of dust or vibration.
●
Clean the connection terminals with dry cotton swabs, etc. every now and
then. Soiled terminals might cause poor connection. Do not exert a strong
force to clean the connection terminals to prevent deformation.
●
Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The
display may be stained if splash or smear is left attached to the surface.
Wiping the product using alcohol, thinner, benzene, detergent, etc. might
erase the printing on the outer casing or cause discoloration.
●
Use as far away as possible from land-line phones, TVs and radios. Use
nearby might affect them.
●
The product may become warm while charging or during other operations,
depending on the situation, but this is not abnormal.
●
When the product is used by a child, parents or guardians should thoroughly
read this manual and teach the child how to use it.
●
Turn off the power before removing the battery pack. If you remove the battery
pack with the power on, saved data might be altered or lost.