Advertisement
2
Assembly
After carefully reading all the safety information and instructions, begin assembling your pump as shown
and Operation
below. Make sure both Intake Filters (A) are pushed all the way onto the Strainers (B). Next push them
onto the T-Filtting (C). Now push the T-Filtting (C) onto the Pump Volute Intake (D) [On the DP800 model
Instructions:
you must install T- Fitting Adaptor (E) into T-Fitting (C) before installing onto pump volute (D)] making
sure the filters are parallel/flat with the Pump base. Next attach your hose for your water feature to the
Pump Volute Outlet as shown below; on the DP800 and DP1200 you need to install the 1" Hose Adaptor
(F) before installing hose.
Attach 1" I.D.
hose here
F
D
DP800
A
NOTE: Hose and
hose clamps
are not included.
You may purchase
these items where
you purchased your
pond pump.
PUMP INSTALLATION:
PREFILTER CLEANING:
2
2
Should you encounter any problems or need replacement parts, contact the Customer Service Representative/Parts Department at
1-866-466-4319 from 8 AM to 5 PM Mon. thru Fri. EST. Extended operating days and hours during peak season requirements.
A
E
B
C
B
D1200
A
Place your pump into the pond making sure it is in a stable location. Lay out the power cord to your
properly grounded receptacle protected by a ground-fault circuit-interrupter (GFCI). Plug in the pow-
er cord and check pump for proper operation. After you have everything working to your satisfac-
tion, you can cover up/hide power cord. You may now enjoy your pond. You may want to review the
versatility/add on accessories section of the instructions to familiarize yourself with what you can
accomplish with your new pump system.
When you see a reduced flow from your pump, it is time to clean the filters. Turn off the power to the
pump - remove the filters - wash the filters in clean water and reinstall on pump - turn the pump back
on and check for proper operation. Having spare filters will make this task more convenient.
Attach 1" I.D.
hose here
F
A
D
B
C
B
DP1800
Attach 1-1/2" I.D.
hose here
Advertisement
