Setting Copy; Information Osd - NEC SB-03TM User Manual

Setting Copy

This function export or import the settings of this module via USB flash device.
The settings are Searched channels, Network Settings, IP Program Settings, Channel Edit, Menu
Language, Time Zone, Parental Control, Closed Caption Options, Channel Lock, Password Setting,
Sound and Information OSD.
NOTE: This function is protected by a password.
Export
1. Insert your USB flash drive to the USB port of this module.
2. On the "Configuration" menu page, press
select "Setting Copy" and press SET button.
3. Enter your password. Then select "OK" and press SET
button. The default password is "0000".
4. Select "Export" and press SET button.
5. Select "Yes" and press SET button. Then the module's settings
data will be exported to your USB flash drive.
6. When the export has been completed correctly, "Export
succeeded." message will be displayed.
NOTE: If an error message is displayed, operate according to the message content.
Import
1. Insert your USB flash drive with the module's settings data
to the USB port of this module.
2. On the "Configuration" menu page, press
select "Setting Copy" and press SET button.
3. Enter your password. Then select "OK" and press SET
button. The default password is "0000".
4. Select "Import" and press SET button.
5. Select "Yes" and press SET button. Then the exported
settings data will be imported from your USB flash drive.
6. When the import has been completed correctly, "Import succeeded." message will be displayed.
NOTE: If an error message is displayed, operate according to the message content.
NOTE: When "Static IP" is selected in the "Network Settings", the IP Address, Netmask, Gateway, and DNS settings will be copied as they
are, so change these settings to appropriate values after import.

Information OSD

The Information OSD displays channel, signal source,
resolution and (if available) programming data on the
screen upon the channel change.
1. On the "System" menu page, press
"Information OSD" and press SET button.
button to select "On" or "Off" and press SET
2. Press
button.
button to
button to
button to select
English-11