Table of Contents
Advertisement
Installation
NOTE: Depending on your LCD monitor, you need to install this module with the optional "SB-02AM" adapter.Refer to the SB-02AM's Quick
Start Guide for the installation.
WARNING: Do not insert foreign objects inside the cabinet during installation.
Do not drop this module, optional slot cover and screws during installation.
1. Turn off the main power to the LCD monitor.
2. Remove the LCD monitor's screws (x2 on the outside), and then
remove the optional slot cover.
3. Insert this module into the LCD monitor.
4. Secure this module by using the two screws from step 2.
(Recommended Fasten Force: 49.0 N·cm - 68.6 N·cm
(5 kgf·cm - 7 kgf·cm))
English-3
Advertisement
Table of Contents
