Telefunken TE 300 EPOK User Manual page 31

Activation
Connection
Base
Plug the transparent connector of the power adapter into the place marked underneath
the base, and plug the other end into a wall outlet.
Handset
1. Insert the 2 AAA NiMH batteries supplied into the handset. Slide the battery
compartment cover back into place.
2. Place the handset in the base, and leave it to charge for at least 24 hours. Make sure
it is inserted in the right direction. When the handset is charged, the symbol is
displayed.
3. After 24 hours, plug the telephone cord into the base and into the telephone wall jack.
Set Date and Time
If you subscribe to your telephone operator's Caller ID service, the date and time will be
automatically set on all the handsets upon each call received.
If you do not subscribe to this service, you can set the date and time manually.
Press 'MENU/OK', then ▼ to display 'CLOCK/ALARM'.
11.
Press 'MENU/OK': the screen displays 'SET TIME'.
12.
13. Enter the date in DD/MM format. Ex.: 04-08 for 4 August.
Press 'MENU/OK', and enter the time in 24-hour, HH: MM format. Ex.: For
14.
example, 14-45 for 14:45 or 2:45pm.
Press 'MENU/OK' to confirm, or press
15.
Power outage
If the power goes out, you can only use the base to receive and make calls. The
telephone will ring when a call comes in, but the screen will not illuminate, and caller ID
will not be saved to the calls list. You will not be able to use the other features of the base
or the handset until power is restored.
to return to standby mode.
31