SkyScan 88905 Quick Setup Manual page 5

DATE
1. The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired
date by use of the + key.
Note: The date can only be set in conjunction with the selected month.
For example, it is not possible to set the date 30 if the month of February is selected.
2. Press and release the SET key to move to "Weekday setting".
WEEKDAY
1. The weekday symbols will be displayed on LCD2 in the pre-set language and flashing.
Set the desired weekday by use of the + key.
2. Press and release the SET key to enter the mode "12/24h Time Format Setting".
12/24H TIME FORMAT
The time format can be display in 12h or 24h (Default setting "12h").
1. The digits "12" or "24" will start flashing on LCD1. By use of the + key select 12h or
24h time format display.
2. Press and release the SET key to enter the mode "ºC or ºF
Temperature Setting
°C OR °F TEMPERATURE
The temperature setting can be set to either to ºF or ºC (Default setting °F).
1. Use the + key to select °F for temperature display in degrees Celsius or °C for degrees
Fahrenheit.
2. Press and release the SET key to exit the setting mode and switch back to the normal
display mode.
EXIT THE MANUAL SET MODE
• To return to the normal display mode from anywhere in manual setting mode simply
press the SNZ key anytime.
• If no keys are pressed for at least 15 seconds in setting mode, the radiocontrolled clock
will automatically switch back to normal display mode.