Advertisement
Making and Receiving Calls
To MAKE a call:
To call an existing contact, click on the
Directories (1) icon. Click on one of the
choices given depending on your contact (2).
Then click the contact's name (3) and hit
Dial (4).
To initiate a call by typing a phone number,
click on the main window of the Cisco IP
Communicator screen and begin dialing the
number. Then press the Enter Key.
When a call is placed, a call notification will
appear in the main Cisco IP Communicator
screen, and the audio will be routed to your
headset.
To RECEIVE a call:
When you receive a call, a red light will blink
on your Cisco IP Communicator screen (5)
and a call notification window will appear in
the lower right corner of your computer
screen (6).
To answer the call, use the controls on your
headset or click the left pane of the call
notification window (7). To dismiss the call,
click the right pane of the call notification
window (8).
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire, C610 and C620 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other
countries. Published 01.11
with Cisco IP Communicator
4
1
5
2
6
3
4
8
7
Advertisement
