Replacing the volume-buttons
board
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the volume-buttons board with the screw holes
on the back-cover assembly.
2
Replace the screws that secure the volume-buttons board to the back-
cover assembly.
3
Slide the volume-buttons board cable into the connector on the volume-
buttons board and press down the latch to secure the cable.
Post-requisites
Replace the battery.
tablet. After working inside your tablet,
After working inside your
tablet. For more
41