Replacing the wireless card
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damage to the wireless mini-card, do not place
any cables under it.
1
Align the notch on the wireless card with the tab on the wireless-card
slot and slide the card into the wireless-card slot.
2
Align the screw hole on the wireless card with the screw hole on the
system board.
3
Connect the antenna cables to the wireless card. The following table
provides the antenna-cable color scheme for the wireless card supported
by your tablet:
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4
Align the screw hole on the wireless-card bracket with the screw hole on
the system board.
5
Replace the screw that secures wireless-card bracket and the wireless
card to the system board.
Post-requisites
Replace the battery.
20
tablet. After working inside your tablet,
After working inside your
Antenna-cable color
White
Black
tablet. For more