Fade-Out And Fade-In Operations; Overlap - Canon Motor Zoom 8 EEE Instruction Manual

FADE-OUT AND FADE-IN OPERATIONS
Fig. 1 FADE-OUT
Gradually lift lower aperture control lever while filming .
This action progressively closes the aperture .
The picture gradually fades as there is progressive underexposure until
there is no exposure at all .
The picture will completely fade-out as the lever reaches the top of the
scale and the aperture is totally closed.
Fig. 2 FADE-IN
Gradually bring only the lower lever down . As the lower lever reaches
the bottom of the scale the
EE
mechanism takes over tor perfect exposure .
Fig. 3 OVERLAP
In normal Fade-In and Fade-Out, a given scene IS made to fade-in at
the end of a fade-out of the previous scene .
In Overlap the fade-in of a scene is superimposed on the fade-out por-
tion of the prevIous scene .
First, fade -out scene as in fig . 1, remembering position of film footage
counter .
Secondly, put on the lens cover and rewind the same length of film
used in fade -out, by paying attention to the footage counter .
Thirdly , now effect fade -in of new scene as illustrated in fig . 2.
19