Sony Trinitron KV-J25 Operating Instructions Manual page 11

5
Select the program position to which you
want to preset a channel.
(1) Make sure the cursor (z) appears beside PR, and
press ENTER.
(2) Press + or – until the program position you want
appears on the menu, and press ENTER.
6
Select the desired channel.
(1) Press + or – to move the cursor (z) to VHF LOW,
and press ENTER.
(2) Press + or – until the desired channel picture
appears on the TV screen, and press ENTER.
7
Press MENU to return to the normal screen.
If the TV system is not properly selected
The picture color may be poor and/or the sound may
be noisy. In this case, select the appropriate TV system.
1 Press PROGR +/– or the number buttons to select
the program position.
2
Display the PRESET menu.
3 Press + or – to move the cursor (z) to TV SYS, and
press ENTER.
4 Press + or – until the appropriate TV system
appears, and press ENTER.
Notes
• The TV system setting is memorized for each program
position.
• If you do not know your local TV system, consult your nearest
Sony dealer or authorized service center.
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1
Press MENU.
2
Press + or – to move the cursor (z) to the
PRESET menu ( ), and press ENTER.
3
Press + or – to move the cursor (z) to SKIP,
and press ENTER.
4
Press + or – until the unused or unwanted
program position appears on the menu,
and press ENTER.
5
Press + or – to select ON, and press ENTER.
6
To disable other program positions, repeat
steps 4 and 5.
7
Press MENU to return to the normal screen.
To cancel the skip setting
1 Display the PRESET menu.
2 Press + or – to move the cursor (z) to SKIP, and
press ENTER.
3 Press + or – until the program position you want to
cancel the skip setting appears, and press ENTER.
4 Press + or – to select OFF, and press ENTER.
11 -EN
Getting Started