Wiring - Wahl CLIP‘N’RINSE Instruction Manual

CLIP 'N' RINSE
slow down the blades.
IMPORTANT: Do not over Oil.
CLEANING YOUR NASAL TRIMMER (Not Included in All Wahl Kits)
Periodically after use, turn the trimmer off and rinse the cutting head
under warm, running water. For more thorough cleaning, remove
the attached cutting head by turning it slightly counter clockwise.
Then rinse the entire head under running water. After cleaning,
replace desired head by turning it slightly clockwise and wipe the
entire trimmer dry with a soft cloth. Always replace the protective
cap after use.

WIRING

WARNING: If the transformer is damaged it must be replaced
by the manufacturers service agent or a similarly qualified personin
order to avoid a hazard.
This product must only be used with the transformer supplied,
Should a replacement be required contact Wahl customer services.
9