Gear Oil - Suzuki Maruti S-Cross Manual

Engine Coolant: 1, 2
INSPECTION AND MAINTENANCE
(3)
(3)
(1)
(2)
(1) FULL HOT
(2) LOW HOT
(3) The lowest point = Fluid level
8) Add just enough specified fluid through
the dipstick hole to fill the transmission
to the proper level.
CAUTION
After checking or adding oil, be sure
to insert the dipstick securely.
Changing Oil
Since special procedures, materials, and
tools are required to change the automatic
transmission oil, it is recommended that
you trust this job to your authorized
SUZUKI dealer.
8-13

Gear Oil

Specified Gear Oil
Manual transmission oil
(1)
(2)
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
54G317
in the chart above.
We highly recommend you use:
API GL-4 SAE 75W-90 for manual trans-
mission gear oil.
Gear Oil Level Check
Manual transmission
54G095
To check the gear oil level, use the follow-
ing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine.
2) Remove the oil filler plug ((1) or (2)).
3) Check the inside of the hole with your
finger. If the oil level comes up to the
bottom of the plug hole, the oil level is
correct. If so, reinstall the plug.
4) If the oil level is low, add gear oil
through the oil filler plug hole ((1) or (2))
until the oil level reaches the bottom of
the filler hole, then reinstall the plug.
Tightening torque for oil filler
and level plug ((1) and (2))
21 Nm (2.1 kgf-m, 15.2 lb-ft)
55KS0-74E
79J143
138
55KS0-74E