PRODUCT
SETUP
WEB-BASED SETUP
WELCOME TO THE D-LINK SETUP WIZARD
NOTE:
If the browser's home page is set to blank, then automatic redirection will not happen and
you will need to go to http://192.168.0.1.
the setup Wizard can only be accessed when the device is in default state. If the device is
not in default state and you wish to use the setup wizard, please reset the device to factory
default state.
DIR-615
CONNECT TO A CABLE/DSL MODEM
plug one end of the ethernet cable into the dIR-615 Internet
port. plug the other end of the cable into your cable/dsl
modem.
CONNECT TO THE DIR-615
plug one end of the ethernet cable into the dIR-615 lan port.
plug the other end of the cable into your pc's ethernet port.
CONFIGURE THE DIR-615
open a web browser. If the browser's home page is set to open
on a web page, the browser will be automatically redirected to
the setup Wizard which you may use to configure your
dIR-615.
3