Samsung SDP-760 User Manual page 22

setup & application
Setting the uSB TwAin
The USB TWAIN mode is available if you use the USB cable to connect between presenter and PC that
has installed a graphic application in compliance with TWAIN (ex: Photoshop (Except CS5), ACDSEE, MS
Office word 2003, etc).
1. From the menu, select ConfiGurATion  uSB TwAin.
2. To activate TWAIN, set it to enABLeD.
For more information, refer to the relevant section of the application program's user manual.
M
`
TWAIN can be performed even if USB TWAIN is set to DISABLED, where only a specific resolution of video can be
`
played properly.
If you want to use other than 320x240 and 640x480, set USB TWAIN to ENABLED under the CONFIGURATION menu.
22_
setup & application
preSenTer ConfiGurATion
FREEZE ALL DISPLAY
 USB TWAIN DISABLED
PROTOCOL 10BYTE
C-VIDEO NTSC
SYSTEM INFO. }
SYSTEM RESET }
RETURN }