Advertisement
Quick Links
Intel® RAID Controller RS3FC044
Quick Installation User's Guide
Thank you for buying an Intel® RAID Controller. The following information will help
you assemble your Intel ® RAID Controller and install components.
Perform all installation work at an electrostatic discharge (ESD)-safe workstation that
meets the requirements of EIA-625, Requirements for Handling Electrostatic
Discharge Sensitive Devices. You must perform all actions in accordance to the latest
revision of the IPC-A-610 ESD-recommended practices.
This guide and other supporting documents are located on the web at:
http://www.intel.com/support.
G99267-001
Advertisement
Related Manuals for Intel RS3FC044
Summary of Contents for Intel RS3FC044
- Page 1 Intel® RAID Controller RS3FC044 Quick Installation User's Guide Thank you for buying an Intel® RAID Controller. The following information will help you assemble your Intel ® RAID Controller and install components. Perform all installation work at an electrostatic discharge (ESD)-safe workstation that meets the requirements of EIA-625, Requirements for Handling Electrostatic Discharge Sensitive Devices.
- Page 2 (This page is intentionally left blank.)
- Page 3 Table of Contents General Installation Process ......................1 Unpack the Controller ....................... 1 Prepare the Computer ..................... 1 Remove the Cover ......................1 Check the Mounting Bracket ..................1 Install the Controller ......................1 Secure the Controller Bracket ..................2 Connect Internal SAS Cables ..................
- Page 4 Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as ® the property of others. Copyright © 2013, Intel Corporation. All rights reserved.
-
Page 5: General Installation Process
Remove the controller from the antistatic bag, and carefully inspect the device for damage. If you notice Turn off the computer, and disconnect the power cord any damage, contact Intel or your reseller support from the rear of the power supply. representative. -
Page 6: Replace The Cover
Use the INTEL_SAS3.SYS driver for the Windows XP* x64, Windows Server 2003* (x86, x64, or A64), Windows Server 2008* (x86, x64, or IA64), Windows Server 2012*, Windows Vista* (x86 or x64), Windows 7*, or Windows Server 2008* R2 operating systems (OSs). Intel does not support the Windows XP x86 server. -
Page 7: Linux Driver Installation
Linux Driver Installation Refer to the Linux ReadMe.txt file on the website http://www.intel.com/support for driver installation directions. - Page 8 G99267-001...