Table of Contents
Advertisement
CX-JN5
Ver 1.1
Remote control
Refer to the pages indicated in parentheses for details.
Buttons with the same or similar names with
the main unit basically have the same function.
1 POWER
2 1-0/10, +10
CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified pr eset
number .
The numbered buttons take on these functions
below when pressed with SHIFT held down
EDIT
Enters AI Edit Recording or Programmed Edit Recording
mode when pressed in stop mode.
BAND
Selects Tuner function and the radio band.
TAPE A/B
Setting the clock
Use the remote.
1 Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
2 Press r or t repeatedly until "CLOCK
SET" appears in the display and then press
ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4 Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of r or t.
To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.
Tip:
"AM 12:00" indicates midnight and "PM 12:00" noon.
If "- -:- - " appears when the unit is turned off
There has been a power interruption. Re-set the clock.
8
SPECTRUM
Changes the spectrum analyzer display.
TUNER MODE
Switches between stereo or monaural FM reception.
3 r, t
CD: selects a track.
Tuner: selects a pr eset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and T imer: sets the time.
4 ALBUM M, N
Selects a previous album or a succeeding album.
5 PLAY MODE
CD: selects Shuffle, Programmed playback, etc.
Tape: selects a reverse mode (deck B only).
REPEAT
Enters CD repeat playback mode.
ENTER
6 CLOCK/TIMER/SET
Enters timer setting mode.
CLOCK/TIMER/SELECT
Selects timer playback, timer recording or timer off.
7 DISPLAY
8 SHIFT
:
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
9 FUNCTION
Switches the active function among CD, T APE, TUNER
and VIDEO (AUX or TV).
En
0 DISC SKIP
Select a disc.
! c/d
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
s
CD and Tape: stops playback.
f,g
CD: searches a track in fast for ward or fast reverse
playback when held down.
Tape: fast for wards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
CD and Tape: pauses playback.
@ SLEEP
Switches the sleep-timer on/off and selects the duration.
# VOLUME ( +, -)
Adjusts the volume.
$ SOUND
Selects BASS or TREBLE setting mode
CLEAR
Clears a track of the CD programmed playback and
Radio preset station.
Note
The button not explained above (KARAOKE) does not
operate for US, Canadian, AEP, UK and CIS models.
The buttons not explained above ( ALBUM M, N )
do not operate for US, Canadian, E, Singapore, Taiwan, Korean
and Australain models.
En
Advertisement
Table of Contents
