Using The Travel Charger - Samsung Galaxy Note II User Manual

Using the Travel Charger

To use the Travel Charger:
1. Plug the flat end of the Travel Charger (1) into the
Power/Accessory Interface connector and the other
end (2) into a standard AC wall outlet.
2. When charging is finished, remove the flat end from
the interface connector jack on the phone.
Note: Failure to unplug the wall charger before you remove the
battery, can cause damage to the phone.
Important! Verify that the handset battery is installed prior to
connection. If the battery is not properly installed
and the wall charger is connected, the handset
may power off and on continuously, preventing
proper operation.
Warning! If your handset has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger. Using excessive
force or a metallic object when pressing on the touch
screen may damage the tempered glass surface and
void the warranty. For more information, refer to
"Standard Limited Warranty" on page 241.
Getting Started 13