Watching The Tv; Watching Two Programs At One Time - Pip - Sony KV-32XBR200 Service Manual

Watching the TV

Many TV features can be accessed directly
through the remote control. The following
chart will explain the function of some
buttons found on your remote control.
Using the White Labeled Buttons for TV Operations
POWER Press when you want to turn equipment on and off.
VTR/DVD DBS/CABLE
TV
FUNCTION
Press when you want to control connected components with your remote control. (see
VTR/DVD DBS/CABLE TV
pages 31-33 for instructions on programming your remote control)
Use for direct channel selection. Press 0-9 to select a channel (for example, to select
0 - 9
channel 10, press 1 and 0), the channel will change after 2 seconds, or you can
and ENTER press ENTER for immediate selection.
Press to scan through the channels.
CH
Keeping the CH + or – pressed allows you to rapidly scan to the desired channel.
VOL Press to adjust the volume.
JUMP Press to alternate or jump back and forth between two channels. The TV will jump
between the current channel and the last channel selected using the 0-9 buttons.
MUTING Press to mute the sound ("MUTING" will appear on the screen). Press again or press
VOL + to restore sound.
Press to freeze the picture.
FREEZE
Press again or press (OFF) to cancel.
yellow labeled button
Press repeatedly until the TV displays the approximate time in minutes (30, 60, or
SLEEP
90) that you want the TV to remain on before shutting off automatically.
Cancel by pressing until SLEEP OFF appears.
Watching Two Programs at One Time — PIP/P&P (Twin View
The Picture-in-Picture (PIP) feature allows you
to view two channels simultaneously, one in
the full size "main" picture and one in a
smaller "window" picture.
Main picture
The sound of the main
channel or input-
picture is received
source mode
Window picture
Main 6
channel or input-
picture
10
source mode
Window
picture
The Picture-and-Picture (P&P) feature allows
you to view two channels simultaneously,
both in a reduced size screen. The main
picture will appear on the right.
Left picture channel The sound of the right
or input-source mode picture is received
yellow labeled button
Right picture
7 6
channel or input-
source mode
Sub Main
picture picture
REFER TO THE ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE
FRONT COVER OF THIS MANUAL AS
YOU REVIEW THIS CHART
TM )
REFER TO THE ILLUSTRATION OF
THE REMOTE CONTROL ON THE
INSIDE FRONT COVER OF THIS
MANUAL AS YOU REVIEW THIS
CHART
Using the Yellow Labeled Buttons for PIP Operations
Some control buttons for PIP and P&P are located under
the cover on the top of the remote control.
Press to display a window picture (PIP).
Each time you press, the picture size will change (1/4 n1/9 n1/16).
Press (OFF) to remove the window picture.
Press to display right (main) and left pictures (P&P).
Press (OFF) to cancel.
Press repeatedly to step through available video inputs:
TV, VIDEO 1, VIDEO 2, VIDEO 3 and VIDEO 4
TV/VIDEO
PIP will display the video source in the window picture.
P&P will display the video source in the left picture.
If you label one of your VIDEO inputs as SKIP, this video input will be
skipped. (see "VIDEO LABEL" on page 27)
Press to alternate sound between the main picture and the window picture
AUDIO
for PIP and the right and left picture for P&P. A
seconds to indicate which picture is receiving sound.
Using your New TV (continued)
Using the White Labeled Buttons for TV Operations
Press repeatedly to step through available displays:
Status
Channel number, current time, channel caption (if set), and MTS mode (if SAP is
DISPLAY selected) are displayed. SAP indication disappears after three seconds.
Caption Vision/XDS
Closed captioning or XDS will be displayed on the screen if the broadcaster offers
these services. (see right)
To cancel the display, press DISPLAY repeatedly until DISPLAY OFF appears.
Press repeatedly to step through available video inputs:
TV/VIDEO
TV, VIDEO 1, VIDEO 2, VIDEO 3 and VIDEO 4
If you select SKIP as a VIDEO LABEL in the SET UP menu, your TV will skip the
video input you selected. (see "VIDEO LABEL" on page 27)
Press to change between the VHF/UHF input and the AUX input. (For detailed
connection information, see "Cable box and cable" on page 4 or "Cable and
ANT
antenna" on page 3)
Press to change from VIDEO input to TV input.
GUIDE Press to cycle through the Multi-channel TV Sound (MTS) options.
MTS STEREO, SAP, MONO (see "MTS" on page 24)
Guide is a feature of DBS, refer to your DBS operating instructions.
(AUX input)
Press to turn off the TV and all other equipment connected with S-Link. (see page 12)
SYSTEM
OFF
Press when you are finished using a VCR and you want to switch to the TV input.
TV/VTR
Your VCR power will remain on.
Press to select an audio option. (see "EFFECT" on page 24) Options:
TRUSURROUND Dolby Virtual
TV/DBS
SIMULATED
EFFECT OFF
TV/DBS is a feature of DBS, refer to your DBS operating instructions.
16
15
Using your New TV (continued)
Using the Yellow Labeled Buttons for PIP Operations
Press to change the TV channel in the secondary picture.
CH +
For PIP, the channel in the window picture will change.
For P&P, the channel in the left picture will change.
CH –
POSITION Press to move the location of the window picture around the main picture.
This function works only for PIP.
Great for copying down phone numbers, addresses, recipes, etc.
For PIP: Press to freeze the main picture and remove the window picture.
Press
FREEZE
Press (OFF) to cancel and resume normal TV viewing.
For P&P: Press to freeze both pictures.
Press again to resume P&P viewing or press (OFF) to cancel and resume
normal TV viewing.
Press to switch the audio and video of the main picture and the window picture for PIP, or
SWAP
between the left and right pictures for P&P.
Press to access CHANNEL INDEX for direct channel selection. (see "Using CHANNEL
INDEX" on page 19)
Press to cancel PIP or P&P functions and return to normal viewing.
OFF
will appear for a few
18
17
or FREEZE to resume PIP viewing.
CAPTION VISION
CAPTION VISION 1
2
3
(Closed Caption)
4
TEXT1
TEXT2
TEXT3
TEXT4
XDS
MENU
Move Select Exit
MENU
CAPTION VISION can be used for programs
that are broadcast with closed caption.
To access CAPTION VISION:
1
Press MENU.
2
Use the to scroll to .
3
Select with the button.
4
Choose a CAPTION VISION option.
5
Access CAPTION VISION/TEXT/XDS
through your DISPLAY button. (see left)
CC1, 2, 3 or 4
Shows you a printed version of the dialog or
sound effects of a program. (The mode should
be set to CC1 for most programs)
TEXT1, 2, 3 or 4
Shows you network/station information
presented using either half or the whole screen.
XDS (Extended Data Service)
Shows a network name, program name,
program length, and time of the show if the
broadcaster offers this service.
Note
• Poor reception of TV programs can cause
errors in CAPTION VISION and XDS.
Captions may appear with a white box or
other errors instead of intended text.
Notes
• The channel being received through the
AUX jack cannot be displayed as a
window picture.
• If one of the pictures received through
PIP/P&P is snowy, the entire screen may
appear snowy. In this case, skip the snowy
channel. (see "CHANNEL SKIP/ADD" on
page 26)