Table of Contents
Advertisement
Linear Acoustic upMAX 2251 User Guide
Chapter 5: Specifications
Sampling Rate
Output Delay
Audio Word Length
Digital Audio In
Digital Audio Out
LtRt/Aux Output
Metadata Input
Metadata Output
GPIO Port
Ethernet Port
Analog Outputs
Frequency Response
Distortion
Dynamic Range
Output Connectors
Digital I/O
Digital Audio Inputs
Digital Audio Outputs
REF Input
Table 5-1 Electrical Specifications
48 kHz ( 0.1%), 44.1 kHz ( 0.1%)
Main (1-6):14 ms (min.), adjustable up to 500 ms
LtRt (7-8): 14 ms (min.), independently adj. up to 500 ms
Up to 24 bits, process dependent
Five BNC female connectors, AES-3ID-1995/SMPTE 276M
Four BNC female connectors, AES-3ID-1995/SMPTE 276M
25-pin female D-connector, +4 dBu balanced (available on
Aux DB-25 connector on rear panel)
RS-485, 9-pin female D-connector on rear panel
RS-485, 9-pin female D-connector on rear panel
TTL level, 25-pin female D-connector
RJ-45 female jack connector
20 Hz–20 kHz, 0.5 dB
Less than 0.01% at 1 kHz
Less than 0.02%, 20 Hz–20 kHz
Greater than 106 dB
LtRt/Aux Output via 25-pin female D-connector
Four unbalanced female BNC connectors compatible with
AES-3ID-1995/SMPTE 276M specifications.
Four unbalanced female BNC connectors compatible with
AES-3ID-1995/SMPTE 276M specifications.
One unbalanced female BNC connectors compatible with AES-
3ID-1995/SMPTE 276M specifications.
27
Advertisement
Table of Contents
