Table of Contents
Advertisement
Linear Acoustic upMAX 2251 User Guide
Chapter 2: Connections and Setup
This chapter covers all required connections for the Linear Acoustic
2.1
Unpacking and Inspection
Before unpacking the unit, inspect the outer carton for shipping damage. If the car-
ton shows damage, inspect the unit in those areas. Please save the carefully designed
shipping carton and packing materials. In the unlikely event that the unit needs to be
returned to the factory, alternate cartons or packing materials may not be adequate
and can cause damage not covered by warranty.
The following essential items are provided with the unit:
•
Warranty information: Fill out and return the postage-paid warranty card (please) to
Linear Acoustic to ensure your software and documentation are kept up to date.
•
Bag containing one power cord (style matches country unit is shipped to), a handy
"sharpie" with our name and logo conspicuously emblazoned on it, a quick start sheet
that is worth reading, and this manual.
2.2
Installation
MAX 225 installation requires:
UP
• three standard rack space units with ADEQUATE VENTILATION; the unit
vents from the front right side and exhausts through the rear power supply;
• standard 75 BNC cables for digital signal connections;
• To connect to digital equipment with 110
matching transformers (available from Canare, Neutrik and other manufactur-
ers).
• AES reference supplied to the AES REF input PRIOR to powering the unit on.
• a suitable monitoring system.
We recommend a multichannel listening environment with at least six speakers
to properly monitor a 5.1-channel program. An inexpensive system (less than
$400) available from Klipsch easily satisfies this requirement.
XLR connectors, use impedance-
9
MAX 2251.
UP
Advertisement
Table of Contents
