Safety Instructions - CBC EA 900RT 1KVAS User Manual

TRUE ON LINE UPS

2. Safety Instructions

PLEASE READ THE FOLLOWING USER MANUAL AND THE SAFETY INSTRUCTIONS
BEFORE INSTALLING THE UNIT AND STARTING IT UP!
2-1 Transport
Please transport the UPS system only in the original packaging (to protect against
shock and impact).
2-2 Set-up
Condensation may occur if the UPS system is moved directly from a cold to a
warm environment. The UPS system must be absolutely dry before being installed.
Please allow an acclimatization time of at least two hours.
Do not install the UPS system near water or in damp environments.
Do not install the UPS system where it would be exposed to direct sunlight or near heat.
Do not block off ventilation openings in the UPS system's housing.
2-3 Installation
Do not connect appliances or items of equipment which would overload the UPS
system (e.g. laser printers) to the UPS outlet socket
Place cables in such a way that no one can step on or trip over them.
Do not connect domestic appliances such as hair dryers to UPS output sockets.
The UPS can be operated by any individuals with no previous experience
Installation for 1K / 2K / 3K
Connect the UPS system only to an earthed shockproof socket outlet.
The building wiring socket outlet (shockproof socket outlet) must be easily accessible
and close to the UPS system.
This is operator installable
When installing the equipment, it should ensure that the sum of the leakage current
of the UPS and the connected consumer does not exceed 3.5mA.
2
Installation for 6K / 10K
Warning: This is a product for restricted sales distribution to informed partners.
Installation restrictions or additional measures may be needed to prevent disturbances.
A readily accessible disconnect device shall be incorporated in the building installation
wiring and must be close to the UPS system.
This is permanently connected equipment and only qualified maintenance personnel
may carry out installations.
2-4 Operation
Do not disconnect the mains cable on the UPS system or the building wiring
socket outlet (shockproof socket outlet) during operations since this would cancel
the protective earthing of the UPS system and of all connected loads.
The UPS system features its own, internal current source (batteries). The UPS
output sockets or output terminals block may be electrically live even if the UPS
system is not connected to the building wiring socket outlet.
In order to fully disconnect the UPS system, first press the Standby switch then
disconnect the mains lead
Ensure that no fluids or other foreign objects can enter the UPS system.
The UPS operates with hazardous voltages. Only qualified maintenance personnel
may carry out repairs
2-5 Maintenance, servicing and faults
The UPS system operates with hazardous voltages. Repairs Should be carried out
only by qualified maintenance personnel.
Caution - risk of electric shock. Even after the unit is disconnected from the mains
power supply (building wiring socket outlet), components inside the UPS system
are still connected to the battery and are still electrically live and dangerous.
Before carrying out any kind of servicing and/or maintenance, disconnect the
batteries and verify that no current is present and no hazardous voltage exist in the
terminals of high capability capacitor such as BUS-capacitors.
TRUE ON LINE UPS
3