Mirrors Positioning; Tilt Mirrors In Reverse - Maserati Ghibli Owner's Manual

Understanding the Vehicle

Mirrors Positioning

The power mirror controls are located
on the driver's door trim panel.
The power mirror controls consist of
mirror select buttons and a four-way
mirror control switch.
3
To adjust a rear view mirror, press
either the L (left) or R (right) button to
select the mirror that you want to
adjust. The spin button will illuminate
96
indicating the rear view mirror is
activated and can be adjusted.
Press the mirror control switch
corresponding to the arrow indicating
the direction of the desired
movement.
For optimal vision orientate the
outside(s) mirror(s) in order to frame
the adjacent lane adjacent and get a
partial overlap with the visible image
on the inside rear-view mirror.
Power mirror preselected positions can
be reset by operating the optional
Memory Driver Seat device. Check
"Driver Memory Seat" in section 3 for
further information.
WARNING!
Vehicles and other objects seen in the
external side convex mirror will look
smaller and farther away than they
really are. Relying only on your
passenger side convex mirror could
cause you to collide with another
vehicle or object. Use the inside mirror
to judge the size or distance of a
vehicle seen in the external side
convex mirror.

Tilt Mirrors in Reverse

This feature provides automatic
external rear-view mirrors positioning,
allowing the driver to view the ground
area behind the front doors. The
external mirrors will move slightly
downward from the current position
when the shift lever is shifted into
reverse. The external mirrors will then
return to the original position when
the lever is shifted out of the reverse
position. Each memory set of the
driver's seat (see "Driver Memory Seat
(for versions/markets, where
provided)" chapter in section 3)
corresponds to a mirrors tilt position in
reverse.
NOTE:
The mirrors tilt in reverse can be
turned on and off using the MTC
System, refer to "MTC Settings" in
section 4.