Dashboard Instruments and Controls
• Touchscreen Beep
When in this display, you can turn
on or shut off the sound activated
by pressure of a touch screen button
(soft-key).
• Control Screen Time-Out
Use this mode to operate the timing
of the control screen display.
• Navigation Turn-by-Turn Displayed
on Cluster
By selecting this feature, the
turn-by-turn directions will appear
4
on the instrument cluster along a
programmed route until the desired
destination is reached (see picture).
160
Clock & Date
Time is always visible on the dashboard
analog clock and in digital format on
the instrument cluster and on the MTC
display.
With this feature it is possible to view
and set the following modes.
• Sync with GPS or Radio Time
When in this mode, time is
automatically set and synchronized
to the GPS or radio signal.
• Set Time Hours
When in this mode, you can set the
hours manually. To select, touch the
+ or – soft-keys to adjust the hours.