Mark V 520
spindle on which to mount the accessory.
Make sure the machine rests firmly on the floor
when in use– not up on the retractable casters.
Do not force the stock. Always feed stock against
the rotation of the blade, cutter or disc. Let the
blade, cutter or disc get up to full speed before
you feed the stock.
Make sure the stock rests firmly against the
worktable, miter gauge, and/or rip fence.
Do not use warped or twisted stock.
Whenever you extend the quill, do not let go of
the quill lever unless you first secure the quill
feed lock.
Do not work with long boards or sheet materi-
als by yourself, unless you use a large rear
support table or roller stands. Never try to
work with boards the are too large for you to
handle safely. It is best to have a helper.
Never stand or lean on the machine. You could
fall on it or it could tip over.
Keep work areas well lit, clean and free from
clutter.
Do not use power equipment in damp, wet or
explosive atmospheres.
Keep visitors a safe distance from power equip-
ment, and make them wear eye and ear protec-
tion.
Make your workshop "child-proof." Unplug
equipment, use padlocks and master switches,
and remove switch keys.
Summary Manual
SM - 5
Need help?
Do you have a question about the MARK V Model 520 and is the answer not in the manual?