Power Supply; Data Connectors; Usb Type B Port (X20) (Standard-Cable); Rj 45-Port (X10) (Standard Cat5-Cable) - Beckhoff CU8880-0000 Installation And Operating Instructions Manual

Product Description
Power supply via USB-port
USB type B Port
RJ 45 Port
4

Power Supply

The Ethernet controller does not need any
additional power supply. The power supply
(5 V DC) is realized by the USB connector.
The LED P20 lights green when power supply
is connected.

Data connectors

The connector are 1 USB port Type B and a RJ45-connector. The pins
are described below:

USB type B Port (X20) (standard-cable)

RJ 45-Port (X10) (standard CAT5-cable)

Pin Signal
1 VCC
2 Data -
3 Data +
4 GND
shield shield
Pin Signal
1 TX+
2 TX-
3 RX+
4 n.c.
5 n.c.
6 RX-
7 n.c.
8 n.c.
CU8880-0000