Mitsubishi Electric MFZ-KJ25VE Service Manual page 38

OPERATING PROCEDURE
5. Removing the horizontal vane motor
(1) Remove the panel. (Refer to 1.)
(2) Remove the screws of the horizontal vane motor sup-
port and pull out the horizontal vane motor support
from the nozzle.
(3) Remove the screws of the horizontal vane motors.
(4) Remove the horizontal vane motors from the horizon-
tal vane motor support.
(5) Disconnect the connectors from the horizontal vane
motor.
Installing the horizontal vane motor
Connect the connectors to the horizontal vane motors
by referring to the colors, red and white, noted on the
vane motor support.
6. Removing the multi-flow vane motor unit
(1) Remove the panel. (Refer to 1.)
(2) Disconnect the connector from the multi-flow vane
motor unit.
(3) Remove the screws of the multi-flow vane motor unit
and pull out the multi-flow vane motor unit from the
nozzle.
OBH666C
Photo 9
Screws of the nozzle
Photo 10
Catch
Photo 11
Screws of the horizontal
vane motors
Photo 12
Screws of the multi-flow vane motor unit
38
PHOTOS
Water cover
Catch
Screws of the horizontal
vane motor support
Rib
Rib
Catches