Mitsubishi Electric MFZ-KJ25VE Service Manual page 37

How to remove the multi-flow
vane and the horizontal vanes
(1) Removing the horizontal vane (front/back)
(1)-1. See the figure below and push to open the indicated
places on the horizontal vanes (between front and back)
with your fingers so that you can access 4 vane shafts
positioned on the back of the horizontal vanes.
(vane shafts on each horizontal vane)
(1)-2. Insert a tool such as a precision screwdriver
in the opening on the vane shaft and lift the catch
of the vane shaft in arrow 1 direction to detach it
from the rib on the horizontal vane. Slide the vane shaft
in arrow 2 direction and separate it from the unit body.
Unit body
(1)-3. Remove the axial rods on the both ends of the
horizontal vane from the unit body.
OBH666C
Unit body
Vane shafts
Vane shaft
Opening
Rib
Catch
Horizontal vane
Horizontal vane (back)
Multi-flow vane
(2) Removing the multi-flow vane
(2)-1.Open the horizontal vanes (front and back) by following (1)-1.
Make sure that 3 vane shafts are on the back of the multi-flow vane.
Top down view from the back of the unit
(2)-2. Insert a tool such as a precision screwdriver in the gap
between multi-flow vane and the vane shaft and lift the catch
of the vane shaft in the arrow 1 direction to detach it from the rib
on the multi-flow vane. Slide the vane shaft in arrow 2 direction
and separate it from the unit body.
Catch
Rib
Multi-flow vane
(2)-3. Remove the axial rod on the one end of the multi-flow
vane from the unit body.
37
Horizontal vane (front)
Vane shafts
Multi-flow vane
Unit body
Vane shaft