Third Seat Installation - Honda Odyssey 2001 Reference Owner's Manual

Protecting Children
Attach the tether strap hook to the
tether attachment point and tighten
the strap according to the child seat
marker's instruction. Make sure the
strap is not twisted.
Driver and Passenger Safety

Third Seat Installation:

There are three attachment points
on the tailgate sill. Select the attach-
ment point you want to use, and
remove the plug with a small flat-
tipped screwdriver or fingernail file.
Install the anchor plate and
mounting hardware. The hardware is
available for purchase from your
Honda dealer (part number 82410-
SE3-C01). For Canadian models, the
hardware is supplied with the vehicle.
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
16lbf.ft (22N.m,2.2kgf.m)
If a torque wrench was not used, see
your Honda dealer as soon as
possible to verify proper installation.
To attach the tether to the child seat,
follow the child seat maker's
instructions.
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.