Selecting The Model - Sony XBR-40LX900 Service Manual

2-2-2. SELECTING THE MODEL

After replacing the BUHS Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
3. Display the DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
4. Press to move to the 002 MODEL (Next) category.
2
XBR-40LX900/46LX900/52LX900/60LX900
Downloaded from www.Manualslib.com
5 +
Channel Volume
DIGITAL SERVICE
001 OP
000 VERS ---
<MAIN> <SUB>
DM1.301J00AA SM1.010W00AA
M2.105C SB1.000W00AA
DD1.016J00AA SD1.010W00AA
(DM1. 3 01J00AA) RF01.05
WP00.521J00AA ID1C117081
ID1C117081 LTY320AB01
PID04020000
WF:2.0.0.99 <BEM>
WF:0B BM1.012W00LU
Camera FW BB1.000W00LU
Camera FW BD1.011J46LUX
---.---------
manuals search engine
SERVICE ADJUSTMENTS
POWER 5. Using the table, press
6 to decrease the data value, to match the model of the TV.
Chassis Model Name
AZ1-H
AZ1-H
AZ1-H
AZ1-H
DIGITAL
002 MODEL
000 SEG
6. Proceed to "Selecting the Destination".
DIGITAL SERVICE
002 MODEL
000 SEG
01 : 1a
3 to increase the data value or
XBR-40LX900 01
XBR-46LX900 01
XBR-52LX900 01
XBR-60LX900 01
SERVICE
01: 1a
1a
1a
1a
1a
Code Name
Data Value
25