Table of Contents
Advertisement
you can dial Speed Dial entries using one key press for locations 2-9, or two key
presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
•
Press and hold the appropriate key for approximately two
seconds.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1.
Press the first digit.
2.
Press and hold the second digit for approximately two seconds.
Using Caller ID
Caller ID allows people to identify a caller before answering the phone by displaying
the number of the incoming call. If you do not want your number displayed when
you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1.
Press
2.
Enter the number you want to call.
3.
Press
To permanently block your number, call the Customer Service department of your
network service provider.
Note: If you have not subscribed to Caller ID, and the back light is set to turn off
after a period of time, pressing
and hold
or press
off. To avoid this problem, set the back light to "flip open". For more information,
see "Backlight" on page 115.
Responding to Call Waiting
When you're on a call, Call Waiting alerts you of incoming calls by sounding two
beeps. Your phone's screen informs you that another call is coming in and displays
the caller's phone number (if it is available and you are in digital mode).
To respond to an incoming call while you're on a call:
•
Press
25 Phone Basics
.
.
twice to answer the second call when the LCD is turned
. (This puts the first caller on hold and answers the second call.)
will switch the back light back on. Either press
Advertisement
Table of Contents
