Accessory Settings - Turbo Cool Down Setup - INSIGHT CS 2 User Manual

Settings

Accessory Settings - Turbo Cool Down Setup

This feature is only available and listed if an EAS Turbo Timer has been
installed. The Turbo Cool Down feature allows the engine to continue running
(after the key is in the off position) until one of four conditions have been met:
1. If the EGT value falls below the target set point.
2. The time set expires.
3. Pressing either the brake or gas pedal.
4. Pressing a button on the CS2.
STEP 1 - Press the Home button to enter the Main Menu
STEP 2 - Use the Up/Down arrow buttons to scroll down to the
Settings option.
STEP 3 - Press Enter.
STEP 4 - Next, select
Accessory Settings from the
Settings menu.
STEP 5 - Select Turbo Cool
Down Setup.
STEP 6 - Choose one of the avail-
able options.
NOTE: 2007-09 Dodge trucks can be turned off using the key's panic button.
2010 Dodge trucks can be turned off if the lock and panic buttons are pressed at
the same time.
22
Settings
Turbo Cool Down Setup
Turn On and Use EGT
Turn On and Use Timer
Do Not Use Turbo Timer
Settings
Accessory Settings
Vehicle Settings
Alert Settings
Sound Duration - 3 sec
Backlight Autodim - 99%
Background Color
WARNING: Do not
use this feature in an
enclosed area.
Select this option if you would
like the turbo timer feature to
use a pre-determined EGT
value.
Select this option if you would
like the turbo timer feature to
use a pre-determined time
setting (seconds).
This option will disable the
turbo timer feature and take you
back to the previous menu.