To Connect A Telephone Cable - Sony VGN-Z Series Operating Instructions Manual

Hide thumbs Also See for VGN-Z Series:
Table of Contents

Advertisement

Using Your VAIO Computer >
Using the Internet

To connect a telephone cable

!
The following procedure applies to models with a built-in modem only.
1
Plug one end of the phone cable (1) into the modem port
2
Plug the other end into the wall jack (2).
!
Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a
private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the built-in modem.
If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.
To set up a dial-up connection to the Internet
!
The following procedure applies to models with a built-in modem only.
1
Click Start and Control Panel.
2
Click Network and Internet.
3
Click Network and Sharing Center.
4
Click Set up a connection or network in the left pane.
5
Click Set up a dial-up connection and Next.
6
Follow the on-screen instructions.
on the computer.
n
54
N

Advertisement

Table of Contents
loading

Table of Contents