Charging & Indicators; Care & Maintenance - MAXTEK 67220 User Manual

Charging & Indicators
Charging the headphones
Plug the micro USB cable into the charge port. It takes
approximately 4 hours to fully charge. When the battery is full, the
red LED light turns off. Only charge the headphones when they are
turned off.
Please note:
On the first time charging the battery, please ensure the battery has been fully
charged before use.
LED indicators
LED off
LED blue
LED flashing blue/red
LED flashing red
LED red
Care & Maintenance
Headphones Maintenance
• Re-charge your headset once every three months when it is not in
• use to keep the battery in good condition.
• If you do not use the headset for a long time. You have to charge
• the battery for 30 minutes and the red LED lights up.
• Do not wash the headset with harsh chemicals, soaps or
• detergents
• For extended storage, first fully charge the battery till the red LED
• turns off.
• This product is not waterproof.
• Do not store the headset in high temperature environments
• including intense sunlight, or near heat or naked flames.
6
Power off / fully charged.
Power on
Pairing mode
Battery almost drained
Battery recharging (power off)
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
WEBSITE:
EMAIL:
: 01270 508538
O
: 1800 995 036
O
www.quesh.co.uk
enquiries@quesh.co.uk