Canon PowerShot Elph 190 S User Manual page 81

3
Enter the access point
password.
z z
Press the [ ] button to access the
keyboard, and then enter the password
(= 22).
z z Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
4
Choose [Auto].
z z Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
z z To save images to a connected computer,
follow the procedure from step 8 in
"Using WPS-Compatible Access Points"
(= 78).
•
To determine the access point password, check on the access point itself or
refer to the user manual.
• If no access points are detected even after you choose [Refresh] in step 2 to
update the list, choose [Manual Settings] in step 2 to complete access point
settings manually. Follow on-screen instructions and enter an SSID, security
settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3. To
use the same password, press the [ ][
press the [ ] button.
] buttons to choose [Next], and then
Previous Access Points
You can reconnect to any previous access points automatically by following
step 4 in "Using WPS-Compatible Access Points"
• To connect to a device via an access point, confirm that the target device
is already connected to the access point, and then follow the procedure
from step 8 in "Using WPS-Compatible Access Points"
• To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow the
procedure in "Using WPS-Compatible Access Points"
step 5 or the procedure in "Connecting to Listed Access Points"
from step 2.
Before Use
Basic Guide
(= 78).
Advanced Guide
Camera Basics
(= 78).
Auto Mode
Other Shooting
(= 78) from
Modes
(= 80)
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
81