Advertisement
12. Ip/Ua BARGRAPH
Indicate the Ia current. When you push the HV pushbutton indicate the Ua voltage in KV.
13. Plate and Load knobs
Tuning knobs of the anode and antenna side capacitor. Used for tuning the PA for max output.
13 turn vacuum capacitors here. The position of the capacitors is different on 4m an 6m! ( both
about 3-4 turns right direction on 4m- lower capacitance)
14. 4/6m SWITCH Switching the input/ output of the PA to 4m/6m. For QRP mode must switch to
real band. ( If you use bypass mode on 4m switch it to 4m, if on 6m switch it to 6m.)
7
Advertisement
