Table of Contents
Advertisement
RESERVE TANK CAP
RESERVE TANK
HOLDER
5. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
6. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator.
Apply non-hardening sealant to the
drain bolt threads, put a new
washer on the drain bolt, and
reinstall the bolt in the engine
block. Tighten it securely.
Tightening torque:
61 Ibf . ft (83 N . m , 8.5 kgf . m)
7. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
1.03 US gal (3.9
,0.86 Imp gal)
Cooling System
FILLER NECK
Fill up to here
8. Pour coolant into the radiator up
to the base of the filler neck.
Maintenance
CONTINUED
Hide quick links:
Advertisement
Table of Contents
