Vehicle Stability Control System - Toyota 2004 Sienna Owner's Manual

Hide thumbs Also See for 2004 Sienna:
Table of Contents

Advertisement

"VSC" warning light
This light warns that there is a problem
somewhere in the traction control system
or the vehicle stability control system.
The light will come on when the ignition
key is turned to "ON" and will go off after
a few seconds.
If the light comes on while driving, the
system does not work. However, as con-
ventional braking operates when applied,
there is no problem to continue your driv-
ing.
186
04 SIENNA_U (L/O 0408)
In the following cases, contact your Toyota
dealer:
D
The warning light does not come on
after the ignition key is turned to "ON".
D
The warning light remains on after the
ignition key is turned to "ON".
D
The warning light comes on while driv-
ing.
Vehicle stability control
system
The
vehicle
stability
control
helps provide integrated control of the
systems such as an anti−lock brake
system, brake assist system, traction
control, engine control, etc. This sys-
tem automatically controls the brakes
and engine to help prevent the vehicle
from skidding when cornering on a slip-
pery road surface or operating steering
wheel abruptly.
This system activates when the vehicle
speed is about more than 15 km/h (9
mph).
You may hear a sound in the engine
compartment for a few seconds just after
the vehicle begins to move. This means
that the system is in the self−check mode,
but does not indicate a malfunction.
2004 SIENNA from Aug. '04 Prod. (OM45422U)
system

Advertisement

Table of Contents
loading

Table of Contents