Insert The Usb Memory - Seiko NS-2250 Installation Manual

4.1 Insert the USB memory

The setup information of the NS-2250 can be stored on a flash memory of the NS-2250
or the included USB memory. When the USB memory is set, setup information is read
from the USB memory when the NS-2250 is started.
For details about using the USB memory, see the Instruction Manual.
(1) insert the clamp into a hole near the USB port.
(2) firmly insert the USB memory all the way into the USB port.
(3) set the cable in a clamp
USB strap clamp
4-2
Figure 4-1 Insert the USB memory
USB memory