XTD 1.9 Installation and Operation Manual
Appendix 4: Installation of Secondary Air Tubes and Baffle
1- Starting with the rear tube, lean and
insert the right end of the secondary
air tube into the rear right channel
hole. Then lift and insert the left end
of the tube into the rear left channel.
2- Align the notch in the left end of the
tube with the key of the left air
channel hole. Using a « Wise grip »
hold the tube and lock it in place by
turning the tube as shown in detail
A. Make sure the notch reaches the
end of the key way.
3- Repeat step 1 and 2 for the other
secondary air tubes.
4- To remove the tubes use the above
steps in reverse order.
47