Troubleshooting; Cassette Tape Player - Sylvania SRCD838 Instruction Manual

If you experience any problems with the unit, please take a
monent to look through this chart and see if you can solve the
problem yourself before you call your dealer.
No power
Check the connection of AC wall outlet.
No sound.
Rising the volume level by turn the Power ON/OFF
- VOLUME knob clockwise.
Noisy sound:
The unit is too close to a TV set or similar appliances.
Relocate the unit.
Radio:
Can not listen to any station, or signal is too weak.
Tune the station properly.
The Function selector is in wrong position, turn it to
RADIO position.
Relocation the unit.
Turntable:
Not playing or sound distortion
The Function selector is in wrong position, turn it to PHONE position.
Loosen the screw, and take out the stylus guard.
(The stylus guard is a white plastic cover that protects the
stylus during transportation.)
Select the correct playback speed.

Troubleshooting

CD Player
Not playing
The Function selector is in wrong position, turn it to CD position.
Load the disc with the label side face up.
If the disc is dirty, clean the surface of the disc.
Try again wth another disc.

Cassette Tape Player

Not playing
The tape has not insert completely. Insert the tape tightly until
the Eject button is ejected.
The Function selector is in wrong position, turn it to
TAPE/AUX position.
Sound is distorted or noisy.
Clean and demagnetize the heads.
If the unit is halt or abnormal operation, unplug the power cord If the unit is halt or abnormal operation, unplug the power cord
from the wall outlet and plug it again. from the wall outlet and plug it again.
Maintenance:
Always keep the turntable clean.
If the surface of the unit gets dirty, wipe with a soft cloth or
use a diluted mild liquid soap. Be sure to remove any excess
liquid completely. Do not use thinner, benzine or alcohol as
they may damage the surface of the unit. Allow the surface
of the unit to dry completely before using.
17